BTRLQ - ELECTROLYTE (SULFURIC ACID SOLUTION)
- MSDS: BTRLQ
- Manufacturer: GNB INC INDUSTRIAL BATTERY DIV WOODLAKE CORP PARK
- Product Name: ELECTROLYTE (SULFURIC ACID SOLUTION)
- National Stock Number: 3930-00D003278
Product Identification
Product ID:ELECTROLYTE (SULFURIC ACID SOLUTION)
MSDS Date:08/05/1988
FSC:3930
NIIN:00D003278
Kit Part:Y
MSDS Number: BTRLQ
Responsible Party
LOMBARD, IL 60148-3249
US
Emergency Phone: 800-424-9300(CHEMTREC)
Info Phone: 708-691-7886
Preparer: JAMES B. DOE, P.E.
Cage: 88219
Contractor
Telephone: 800-872-0471/630-691-7841
Cage: 88219
Ingredients
SULFURIC ACID SOLUTION (SARA III)
CAS: 7664-93-9
RTECS: WS5600000
Fraction By Weight: 20-40%
OSHA PEL 1 MG/M3
ACGIH TLV: 1 MG/M3; 9394
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
NON-HAZARDOUS MATERIALS
Fraction By Weight: 60-80%
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:NOSE,EYE & THROAT IRRIT.
CHRONIC:REPEATED EXPOSURE TO MIST OR LIQUID CAUSES RESPIRATORY
DERMATITS, CONJUNCTIVITIS & LACRIMATION.
Explanation of Carcinogenicity:PER MSDS NOT LISTED IN NTP, IARC, OSHA.
Effects of Overexposure:STINGING AND BURNING SENSATION TO SKIN AND
EYES.
Medical Cond Aggravated by Exposure:EXPOSURE TO ACID MIST CAN AGGRAVATE
PULMONARY CONDITIONS.
First Aid
First Aid:EYE:IMMED WASH W/LG AMTS OF WATER. CONTINUE FLUSHING FOR
15MINS. GET MED ATTN PROMPTLY. SKIN:PROMPTLY WASH WITH SOAP &
WATER. GET MED ATTN PROMPTLY. INHAL:REMOVE PERSON TO FRESH AIR. IF
BREATHING HAS STOPPED, PERFORM ARTIFICIAL RESPIRATION. GET MED
ATTN PROMPTLY. INGEST:GET MED ATTN IMMED. GIVE LARGE QUANTITIES OF
WATER TIL MED HELP ARRIVES.
Fire Fighting
Extinguishing Media:PER MSDS NOT APPLICABLE. WATER WILL CREATE AN
EXOTHERMIC REACTION.
Fire Fighting Procedures:MOVE ELECTROLYTE CONTAINERS FROM FIRE AREA IF
POSSIBLE.COOL CONTAINERS EXPOSED TO FLAMES W/WATER FROM SIDE TIL
WELL AFT FIRE IS OUT.USE RESP FOR MIST PROTECTION
Unusual Fire/Explosion Hazard:DON'T USE H2O DIRECTLY ON ELECTROLYTE.IF
LG MATS OF COMBUST MATLS INVOLVED USE H2O SPRAY OR FOG IN FLOODING
AMTS.USE H2O SPRAY TO ABOSRB CORR VAPORS.
Accidental Release
Spill Release Procedures:CONTAIN SPILL W/ABSORBANT DIKE. APPLY BAKING
SODA, SODA ASH, CAUSTIC SODA OR EQUIVALENT TO NEUTRALIZE THE
ELECTROLYTE.
Neutralizing Agent:BAKING SODA, SODA ASH, CAUSTIC SODA, OR EQUIVALENT.
Handling
Handling and Storage Precautions:AVOID ELECTROLYTE CONTACT WITH EYES,
SKIN, OR CLOTHING. AVOID BREATHING ELECTRLYTE VAPOR. NO SMOKING
REGULATIONS IF POSSIBILITY OF HYDROGEN EVOLUTION.
Other Precautions:STORE ELECTROLYTE ONLY IN APPROVED CONTAINERS.
Exposure Controls
Respiratory Protection:SELF-CONTAINED BREATHING APPARATUS IF FUMES OR
MIST ARE PRESENT.
Ventilation:LOCAL EXHAUST AND MECHANICAL (GENERAL) EXHAUST TO OUTSIDE
AIR.
Protective Gloves:RUBBER.
Eye Protection:GOGGLES OR FACE SHIELD.
Other Protective Equipment:RUBBER BOOTS, RUBBER APRON AND POLYESTER
CLOTHING. EYEWASH & SAFETY SHOWER FACILITIES.
Work Hygienic Practices:WASH HANDS & PROTECTIVE EQUIPMENT WITH WATER
AFTER USE.
Supplemental Safety and Health
MSDS SUBMITTED W/MSDS FOR LEAD-ACID CELL BATTERY (ANTIMONY). SEE SAME
NSN/CAGE PART A. MSDS SUBMITTED BY DCSC-SS(S.E. MERRIT) 09JUN94 FOR
SPO73094D8003 FSC3930.
Chemical Properties
HCC:C1
Boiling Pt:B.P. Text:219F,104C
Melt/Freeze Pt:M.P/F.P Text:7.7 TO -40F
Vapor Pres:20.8 @77F
Vapor Density:3.4
Spec Gravity:1.140-1.300
Evaporation Rate & Reference:<1, BUAC=1
Solubility in Water:INFINITE
Appearance and Odor:CLEAR LIQUID WITH SHARP, PENETRATING PUNGENT ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
IRON; POWDERED METALS; ZINC & STEEL REACT W/SULFURIC ACID & RELEASE
FLAMMABLE HYDROGEN GAS.
Stability Condition to Avoid:VIOLENT EXO REACTION W/H2O & ORG MATLS.MAY
IGNITE FINELY DIVIDED COMBUST MATLS ON CONTACT.RUNOFF TO SEWER
FIRE/EXPL HAZ
Hazardous Decomposition Products:THERMAL DECOMPOSITION PRODUCTS INCLUDE
HIGHLY TOXIC FUMES OF SULFURIC OXIDES (SOX).
Disposal
Waste Disposal Methods:NEUTRALIZED ELECTROLYTE MAY BE DISPOSED IN SEWER
SYSTEM IF LOCAL REGULATIONS PERMIT. ANY DIKE MATERIAL SHOULD BE
DISPOSED IN ACCORDANCE WITH LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.